Accelerators

From Atari Wiki
Revision as of 13:57, 14 December 2015 by Tompee (talk | contribs)
Jump to navigation Jump to search

The beginnings of a list of hardware accelerator boards available for the TOS range.
See also Software_accelerators

Atari ST Range

  • AdSpeed ST - ICD - 16Mhz accelerator. Software switchable between 8/16Mhz

Atari Falcon

  • Afterburner 040 - Top of the range for its time (mid-nineties) 68040 booster. Up to 64Mb 32-bit fast-RAM.
  • Blow Up FX - Boosted '030 to 40mhz, added fastram and screen resolution enhancer, another one from Atari Workshops.
  • Centurbo 1 - Rodolphe Czuba's version of this.
  • Centurbo 2 - (Centek)
  • CT60 / CT63 / CT60e - Power Phenix 68060 accelerator for the Atari Falcon.
  • DX-3 board - from OXO Concept
  • HighSpeed40 - This was in 1996 and you could switch between 20 and 40MHz cpu.
  • Mighty Sonic - Has it's own 68030 and up to 64Mb of 32-bit fast-RAM.
  • Nemesis - System overclocker to 150% of normal Falcon speed, handled by Titan Designs/Black Scorpion in UK
  • Phantom - Cheaper Czech-built Nemesis style overclocker.
  • Power Up - Simple 16 to 32mhz cpu clocker, very early, distributed by Atari Workshops in the UK.
  • Power Up 2 by System Soltuions - 32Mhz accelerator for Atari Falcon
  • Skunk 32
  • Speed Resolution board 40mhz by Hard&Soft
  • Tempest - PowerPC based, extensively written about, prototyped, but not made?! This started as contemporary with CT2!
  • Veloce Falcon - To take Falcon to 40mhz, fastram capability, modelled on Veloce STe, never produced?
  • Wizztronics Barracuda 040 - 33 mhz 6840 and two vme-bus-slots. Optional FastRam-card, 128 megs. (never sold?)

Back to Peripherals for Atari computers