ST Picture Formats
ST Picture Formats
------------------
Edited by:
David Baggett, Hans Wessels
5640 Vantage Point Road
Columbia, MD 21044 USA
(301) 596-4779
(Please report errors or additions to H.Wessels@C12H22O11.org.)
Copyright (C) 1988, 1989, 1990, 1991 by David M. Baggett
Additions 2006-2011 Hans Wessels are public domain.
Non-profit redistribution of this document is permitted, provided
the document is not modified in any way.
Reproduction of this document in whole or in part for commercial
purposes is expressly forbidden without the prior written consent
of David M. Baggett.
The information presented here is not guaranteed to be correct.
The editor and contributors will in no event be liable for direct,
indirect, incidental, or consequential damages resulting from the
use of the information in this document.
This document is the product of many hours of volunteer work by a
large number of people. Please respect this -- do not violate the
distribution policy.
CONTRIBUTORS
Steve Belczyk Phil Blanchfield Jason Blochowiak John Brochu**
David Brooks Daniel Deimert Neil Forsyth Stefan Hoehn
Gerfried Klein G. "Maddog" Knauss Ken MacLeod Shamus McBride
Jim McCabe Lars Michael Darek Mihocka David Mumper
George Nassas Jim Omura George Seto Joe Smith
Greg Wageman Roland Waldi* Gerry Wheeler
Contents
--------
NEOchrome *.NEO
NEOchrome Animation *.ANI
DEGAS *.PI? ? = 1, 2, 3 (4, 5, 6)
DEGAS Elite *.PI? ? = 1, 2, 3
DEGAS Elite (Compressed) *.PC? ? = 1, 2, 3
DEGAS Elite block *.BL? ? = 1, 2, 3
DEGAS Elite icon *.ICN
CrackArt *.CA? ? = 1, 2, 3
ArtDirector *.ART
Tiny *.TN? ? = 1, 2, 3, Y, (4, 5, 6)
Spectrum 512 *.SPU
Spectrum 512 (Compressed) *.SPC
Spectrum 512 (Smooshed) *.SPS
Spectrum 512 Extended *.SPX
Photochrome *.PCS
QuantumPaint *.PBX
Art Director *.ART
C.O.L.R. Object Editor Mural *.MUR
Doodle *.DOO
Cyber Paint Sequence *.SEQ
Animatic Film *.FLM
Animaster Sprite Bank *.ASB
STOS *.MBK
GEM Bit Image *.IMG
STAD *.PAC
Imagic Film/Picture *.IC? ? = 1, 2, 3
IFF *.IFF
HighresMedium *.HRM
Overscan Interlaced *.PCI
Picture Packer *.PP1? ? = 1, 2, 3
MacPaint *.MAC
FuckPaint *.PI4, *.PI9
RGB Intermediate Format *.RGB
ComputerEyes Raw Data Format *.CE? ? = 1, 2
TruePaint *.TPI
DelmPaint *.DEL, *.DPH
PackBits Compression Algorithm
Introductory Information
------------------------
word = 2 bytes
long = 4 bytes
palette = Hardware color palette, stored as 16 words. First word is
color register zero (background), last word is color register
15. Each word has the form:
Bit: (MSB) 15 14 13 12 11 10 09 08 07 06 05 04 03 02 01 00 (LSB)
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
0 0 0 0 0 R2 R1 R0 0 G2 G1 G0 0 B2 B1 B0
R2 = MSB of red intensity
R0 = LSB of red intensity
G2 = MSB of green intensity
G0 = LSB of green intensity
B2 = MSB of blue intensity
B0 = LSB of blue intensity
Intensity ranges from 0 (color not present) to 7 (highest
intensity).
Example: { red = 7, green = 3, blue = 5 } -> 0735 (hex)
Caveat: It is wise to mask off the upper four bits of each
palette entry, since a few programs store special
information there (most notably Art Studio).
The Formats
-----------
<NEOchrome> *.NEO
1 word flag byte [always 0]
1 word resolution [0 = low res, 1 = medium res, 2 = high res]
16 words palette
12 bytes filename [usually " . "]
1 word color animation limits. High bit (bit 15) set if color
animation data is valid. Low byte contains color animation
limits (4 most significant bits are left/lower limit,
4 least significant bits are right/upper limit).
1 word color animation speed and direction. High bit (bit 15) set
if animation is on. Low order byte is # vblanks per step.
If negative, scroll is left (decreasing). Number of vblanks
between cycles is |x| - 1
1 word # of color steps (as defined in previous word) to display
picture before going to the next. (For use in slide shows)
1 word image X offset [unused, always 0]
1 word image Y offset [unused, always 0]
1 word image width [unused, always 320]
1 word image height [unused, always 200]
33 words reserved for future expansion
16000 words picture data (screen memory)
-----------
32128 bytes total
<NEOchrome Animation> *.ANI
NOTE: To get this feature on versions 0.9 and later select the Grabber
icon and click both mouse buttons in the eye of the second R in the
word GRABBER.
Interestingly enough, some versions of NEO only require you
to press the right button, not both. Hmmm...
1 long magic number BABEEBEA (hex) (seems to be ignored)
1 word width of image in bytes (always divisible by 8)
1 word height of image in scan lines
1 word size of image in bytes + 10 (!)
1 word x coordinate of image (must be divisible by 16) - 1
1 word y coordinate of image - 1
1 word number of frames
1 word animation speed (# vblanks to delay between frames)
1 long reserved; should be zero
--------
22 bytes total for header
? words image data (words of screen memory) for each frame, in
order
<DEGAS> *.PI1 (low resolution)
*.PI2 (medium resolution)
*.PI3 (high resolution)
(PI4, PI5, PI6)
1 word resolution (0 = low res, 1 = medium res, 2 = high res)
Other bits may be used in the future; use a simple bit
test rather than checking for specific word values.
16 words palette
16000 words picture data (screen memory)
-----------
32034 bytes total
Conny Pettersson of Unit Seventeen proposed to extend the Degas format with
PI4 and PI5 for TT resolutions in a text file accompaning the viewst program:
For saving the pictures, I have extended the standard Degas-format PI0 to
the TT-resolutions. Following is a description of the format I use:
ST-Low TT-Low TT-Medium
Extension PI0 PI4 PI5
Resolution 1 word: $0000 1 word: $0007 1 word: $0004
Colormap 16 word 256 word 16 word
Bitmap 32000 bytes 153600 bytes 153600 bytes
Total length 32034 bytes 154114 bytes 153634 bytes
This format is not in wide spread use as datacompression on those huge screens
really makes sence. Nevertheless various file-extension decriptions on the
internet assign the extensions PI4, PI5 and PI6 to TT Degas resolutions.
<DEGAS Elite> *.PI1 (low resolution)
*.PI2 (medium resolution)
*.PI3 (high resolution)
1 word resolution (0 = low res, 1 = medium res, 2 = high res)
Other bits may be used in the future; use a simple bit
test rather than checking for specific word values.
16 words palette
For high resolution pictures the least significant bit of
the first word determines whether the picture is black on
white (bit set) or white on black (bit not set)
16000 words picture data (screen memory)
4 words left color animation limit table (starting color numbers)
4 words right color animation limit table (ending color numbers)
4 words animation channel direction flag (0 = left, 1 = off, 2 = right)
4 words 128 - animation channel delay in 1/60's of a second. [0 - 128]
(I.e., subtract word from 128 to get 1/60th's of a second.)
-----------
32066 bytes total
<DEGAS Elite (Compressed)> *.PC1 (low resolution)
*.PC2 (medium resolution)
*.PC3 (high resolution)
1 word resolution (same as Degas, but high order bit is set;
i.e., hex 8000 = low res, hex 8001 = medium res,
hex 8002 = high res). Other bits may be used in the
future; use a simple bit test rather than checking
for specific word values.
16 words palette
For high resolution pictures the least significant bit of
the first word determines whether the picture is black on
white (bit set) or white on black (bit not set)
< 32000 bytes control/data bytes
4 words left color animation limit table (starting color numbers)
4 words right color animation limit table (ending color numbers)
4 words animation channel direction flag [0 = left, 1 = off, 2 = right]
4 words 128 - animation channel delay in 1/60's of a second. [0 - 128]
(I.e., subtract word from 128 to get 1/60th's of a second.)
-----------
< 32066 bytes total
Compression Scheme:
PackBits compression is used (see below). Each scan line is compressed
separately; i.e., all data for a given scan line appears before any data
for the next scan line. The scan lines are specified from top to bottom
(i.e., 0 is first). For each scan line, all the data for a given bit plane
appears before any data for the next higher order bit plane. Note that this
is identical to the IFF 'BODY' image data.
To clarify: The first data in the file will be the data for the lowest
order bit plane of scan line zero, followed by the data for the next higher
order bit plane of scan line zero, etc., until all bit planes have been
specified for scan line zero. The next data in the file will be the data
for the lowest order bit plane of scan line one, followed by the data for
the next higher order bit plane of scan line one, etc., until all bit planes
have been specified for all scan lines.
Caveats:
DEGAS Elite's picture loading routine places some restrictions on
compressed DEGAS files:
o Elite uses a 40-byte buffer to store data being decompressed.
o Whenever a control command is encountered, bytes are stuffed
in this buffer.
o The buffer is only emptied when there are EXACTLY 40
characters in it.
The important conclusion here is that
No control command may cause the buffer to have more than 40
bytes in it. In other words, all control commands must end on
or before the 40-byte boundary.
Any picture violating the last condition will cause Elite to get a bus
error when the picture is loaded.
<DEGAS Elite block> *.BL1 (low resolution)
*.BL2 (medium resolution)
*.BL3 (high resolution)
Degas Elite block files are IFF files with a BL? extension. In a Degas
block the following IFF chunks are found: ILBM, BMHD, CMAP and BODY.
See the IFF format description.
<DEGAS Elite icon> *.ICN
This file format is an ASCII file describing the ICON in C-format:#define ICON_W 0x00BF
#define ICON_H 0x???? : Height of the icon in lines (hexadecimal value)
#define ICONSIZE 0x???? : Width of the icon in pixels
int image[ICONSIZE] = 0x???? : Size of the icon in words (hexadecimal value)
{
?? : ICONSIZE words, icon image data (hexadecimal values)
}
<CarckArt> *.CA1 (low resolution)
*.CA2 (medium resolution)
*.CA3 (high resolution)
1 word 'CA' crackart magic
1 byte compression: 00 = uncompressed, 01 = compressed
1 byte resolution: 00 = low res, 01 = medium res, 02 = high res
?? words palette
For low res pictures there are 16 palette entries
For med res pictures there are 4 palette entries
For high res pictures there are 0 palette entries
?? bytes Picture data:
For uncompressed pictures 32000 bytes follow
For compressed pictures the compressed data follows
-----------
< 32057 bytes total
CrackArt data compression:
1 byte Escape character
1 byte Delta: initially the 32000 screen memory are
filled with the delta byte
1 word Offset: offset between two packed bytes;
Offset is added to the current byte position
to calculate the next byte position. When the
next byte position is greater 32000, the next
byte position is the first position of screen
memory not written to
if Offset = 0, the whole screen if filled with
the delta byte, no packed bytes follow
1 byte Cmd: Command byte
Cmd <> Escape character: Cmd = one literal byte
Cmd = Escape charater:
read 1 control byte
0: read one byte, n, and one byte, b;
repeat b (n+1) times
1: read one word, n, and one byte, b;
repeat b (n+1) times
2: read one byte, if zero: stop else read
one extra byte and to make word n:
repeat Delta (n+1) times
Escape character: output one escape charater
else: read one byte, b;
repeat b cmd times
Decompression stops when Escape 2,0 is found or 32000 bytes have been written
<ArtDirector> *.ART
32000 bytes Picture data
8x16 words 8 palettes
8 bytes 8 palette flags, the first pallete with a nonzero flag is used
248 bytes ?? possibly animation infromation
-----------
32512 bytes total
<Tiny> *.TNY (any resolution)
*.TN1 (low resolution)
*.TN2 (medium resolution)
*.TN3 (high resolution)
Several people have reported sightings of mutated Tiny pictures that
do not follow the standard format, so let's be careful out there. What
is described here is the format that David Mumper's original
TNYSTUFF.PRG produces. The TN4 extension has been found on animated low
resolution files. One can assume the same person(s) will also use TN5 and
TN6 for extensions for animated medium and high resolution.
1 byte resolution (same as NEO, but +3 indicates rotation
information also follows)
If resolution > 2 {
1 byte left and right color animation limits. High 4 bits
hold left (start) limit; low 4 bits hold right (end) limit
1 byte direction and speed of color animation (negative value
indicates left, positive indicates right, absolute value
is delay in 1/60's of a second.
1 word color rotation duration (number of iterations)
}
16 words palette
1 word number of control bytes
1 word number of data words
3-10667 bytes control bytes
1-16000 words data words
-------------
42-32044 bytes total
Control byte meanings:
For a given control byte, x:
x < 0 Copy -x of unique words to take from the data section
(from 1 to 128)
x = 0 1 word is taken from the control section which specifies
the number of times to repeat the next data word (from
128 to 32767)
x = 1 1 word is taken from the control section which specifies
the number of unique words to be taken from the data
section (from 128 - 32767)
x > 1 Specifies the number of times to repeat the next word
taken from the data section (from 2 to 127)
Format of expanded data:
The expanded data is not simply screen memory bitmap data; instead, the
data is divided into four sets of vertical columns. (This results in
better compression.) A column consists of one specific word taken
from each scan line, going from top to bottom. For example, column 1
consists of word 1 on scanline 1 followed by word 1 on scanline 2, etc.,
followed by word 1 on scanline 200.
The columns appear in the following order:
1st set contains columns 1, 5, 9, 13, ..., 69, 73, 77 in order
2nd set contains columns 2, 6, 10, 14, ..., 70, 74, 78 in order
3rd set contains columns 3, 7, 11, 15, ..., 71, 75, 79 in order
4th set contains columns 4, 8, 12, 16, ..., 72, 76, 80 in order
Note that Tiny partitions the screen this way regardless of resolution; i.e.,
these aren't bitplanes. For example, medium resolution only has two bitplanes,
but Tiny still divides medium resolution pictures into four parts.
<Spectrum 512> *.SPU
80 words first scan line of picture (unused) -- should be zeroes
15920 words picture data (screen memory) for scan lines 1 through 199
9552 words 3 palettes for each scan line (the top scan line is
not included because Spectrum 512 can't display it)
-----------
51104 bytes total
Note that the Spectrum 512 mode's three palette changes per scan
line allow more colors on the screen than normally possible, but a
tremendous amount of CPU time is required to maintain the image.
The Spectrum format specifies a palette of 48 colors for each scan line.
To decode a Spectrum picture, one must be know which of these 48 colors
are in effect for a given horizontal pixel position.
Given an x-coordinate (from 0 to 319) and a color index (from 0 to 15),
the following C function will return the proper index into the Spectrum
palette (from 0 to 47):
/*
* Given an x-coordinate and a color index, returns the corresponding
* Spectrum palette index.
*
* by Steve Belczyk; placed in the public domain December, 1990.
*/
int
FindIndex(x, c)
int x, c;
{
int x1;
x1 = 10 * c;
if (1 & c) /* If c is odd */
x1 = x1 - 5;
else /* If c is even */
x1 = x1 + 1;
if (x >= x1 && x < x1 + 160)
c = c + 16;
else if (x >= x1 + 160)
c = c + 32;
return c;
}
<Spectrum 512 (Compressed)> *.SPC
1 word flag word [$5350 or "SP"]
1 word reserved for future use [always 0]
1 long length of data bit map
1 long length of color bit map
<= 32092 bytes compressed data bit map
<= 17910 bytes compressed color bit map
--------------
<= 50014 bytes total
Data compression:
Compression is via a modified run length encoding (RLE) scheme,
similar to DEGAS compressed and Tiny. The data map is stored as a
sequence of records. Each record consists of a header byte followed by
one or more data bytes. The meaning of the header byte is as follows:
For a given header byte, x:
0 <= x <= 127 Use the next x + 1 bytes literally (no repetition)
-128 <= x <= -1 Use the next byte -x + 2 times
The data appears in the following order:
1. Picture data, bit plane 0, scan lines 1 - 199
2. Picture data, bit plane 1, scan lines 1 - 199
3. Picture data, bit plane 2, scan lines 1 - 199
4. Picture data, bit plane 3, scan lines 1 - 199
Decompression of data ends when 31840 data bytes have been used.
Color map compression:
Each 16-word palette is compressed separately. There are three
palettes for each scan line (597 total). The color map is stored as a
sequence of records. Each record starts with a 1-word bit vector which
specifies which of the 16 palette entries are included in the data
following the bit vector (1 = included, 0 = not included). If a palette
entry is not included, it is assumed to be zero (black). The least
significant bit of the bit vector refers to palette entry zero, while the
most significant bit refers to palette entry 15. Bit 15 must be zero,
since Spectrum 512 does not use palette entry 15. Bit 0 should also be
zero, since Spectrum 512 always makes the background color black.
The words specifying the values for the palette entries indicated in
the bit vector follow the bit vector itself, in order (0 - 15).
NOTE: Regarding Spectrum pictures, Shamus McBride reports the following:
"... [The Picture Formats List] says bit 15 of the color map vector
must be zero. I've encountered quite a few files where [bit 15] is
set (with no associated palette entry)..."
<Spectrum 512 (Smooshed), or Anispec, see below> *.SPS
This format compresses Spectrum 512 pictures better than the standard
method. There are at least two programs that support this format, SPSLIDEX
and ANISPEC, although the two seem to differ slightly in their interpretation
of the format.
One point of interest: Shamus McBride deciphered this format without an ST!
1 word 5350 (hex) ("SP")
1 word 0 (reserved for future use)
1 long length of data bit map
1 long length of color bit map
<= 32092 bytes compressed data bit map
<= 17910 bytes compressed color bit map
----------
< 50014 bytes total
Data compression:
Compression is via a modified run length encoding (RLE) scheme,
similar to that used in Spectrum Compressed (*.SPC) pictures.
The data map is stored as a sequence of records. Each record consists of a
header byte followed by one or more data bytes. The meaning of the header
byte is as follows:
For a given header byte, x (unsigned):
0 <= x <= 127 Use the next byte x + 3 times
128 <= x <= 255 Use the next x - 128 + 1 bytes literally
(no repetition)
There are two kinds of *.SPS files. The type is defined by the least significant
bit of the last byte in the color bit map.
If the bit is set the data appears in the same order as *.SPC files:
1. Picture data, bit plane 0, scan lines 1 - 199
2. Picture data, bit plane 1, scan lines 1 - 199
3. Picture data, bit plane 2, scan lines 1 - 199
4. Picture data, bit plane 3, scan lines 1 - 199
If the bit is not set the data is encoded as byte wide vertical strips:
Picture data, bit plane 0, scan line 1, MSB.
Picture data, bit plane 0, scan line 2, MSB.
Picture data, bit plane 0, scan line 3, MSB.
. . .
Picture data, bit plane 0, scan line 199, MSB.
Picture data, bit plane 0, scan line 1, LSB.
Picture data, bit plane 0, scan line 2, LSB.
. . .
Picture data, bit plane 0, scan line 199, LSB.
Picture data, bit plane 1, scan line 1, MSB.
. . .
Picture data, bit plane 3, scan line 198, LSB
Picture data, bit plane 3, scan line 199, LSB.
A for loop to process that data would look like
for (plane = 0; plane < 4; plane++)
for (x = 0; x < 320; x += 8)
for (y = 1; y < 200; y++)
for (x1 = 0; x1 < 8; x1++)
image[y, x + x1] = ...
Color map compression:
Color map compression is similar to *.SPC color map compression, but
the map is compressed as a string of bits, rather than words. There are
597 records (one for each palette). Each record is composed of a 14-bit
header followed by a number of 9-bit palette entries. The 14-bit header
specifies which palette entries follow (1 = included, 0 = not included).
The most significant bit of the header refers to palette entry 1, while
the least significant bit refers to palette 14. Palette entries 0 and 15
are forced to black (zero). Each palette entry is encoded as "rrrgggbbb".
The format of the palette is described above in the section on uncompressed
Spectrum pictures (*.SPU).
<Spectrum 512 (Anispec)> *.SPS
Format for animated Spectrum pictures.
1 word 5353 (hex) ("SS")
30 bytes unknown header bytes
51104 bytes uncompressed spectrum picture (see SPU format)
?? bytes animation data (unknown format)
<Spectrum 512 Extended> *.SPX
SPX files are extended Spectrum files with more than 200 lines in the picture,
designed by Gizmo of Electronic Images. With a SPX createor like SPXCRT14.PRG
multiple spectrumpictures can be attachted to become one big .SPX file. There
are two known versions of the format. Version 2 files of the format can be
packed as a whole (including the header) with either Ice 2.10 or Atomik 3.5.
3 bytes 'SPX', SPX magic header
1 byte version (01 or 02)
1 byte graphics compression flag, 0 = unpacked
1 byte palette compression flag, 0 = unpacked
1 byte number of 32000 byte screens
3 bytes reserved
?? bytes NULL terminated author string
?? bytes NULL terminated description string
4 bytes size of (packed) graphics data in bytes
4 bytes size of (packed) palette data in bytes
?? bytes (packed) graphics data
?? bytes (packed) palette data
The number of lines in the picture can be calculated by deviding the size of
the unpacked graphics data by 160. The unpacked SPX picture can be treated as a
Spectrum screen with more than 200 lines.
In version 1 when a compression flag is set the data is packed with Ice 2.10.
In version 2 a special packer is used, graphics and palettes are packed in one chunk.
4 bytes depacked size
4 bytes packed size
Like the Ice packer data is packed from end of file to start. The depakcer starts
to read data from packed data start+packed size and to write data to
depacked data start+depacked size. A long is read form packed data into a bitbuffer,
when the bitbuffer is empty it is refilled with a new long from the packed file.
With getbits(n) the n most significat bytes are read from the bitbuffer.
while(bytes read<depacked size)
getbits(1)
0 : literals
len = getbits(4*(getbits(2)+1))
read len bytes with getbits(8) and write them to the destination
if(len<>$ffff) do a ptr_len
1 : ptr_len
ptr = getbits(4*(getbits(2)+1))
len = getbits(4*(getbits(2)+1))
copy len+3 bytes from ptr
Note: after a literal there is always a ptr_len except when len was $ffff.
<PhotoChrome> *.PCS (low resolution only)
1 word 0x0140 (hex) x-resolution (always 320)
1 word 0x00C8 (hex) y-resolution (always 200)
1 byte 00 = single screen mode
nonzero value's = alternating screen mode,
bit 0 (0x01) not set: second screen data is xor'ed with first screen
bit 1 (0x02) not set: second color palette is xor'ed with first
1 byte bit 0 (0x01) set: 50 Hz mode, when not set 60 Hz mode
?? bytes compressed screen data
?? bytes compressed palette
?? bytes compressed second screen data (in case of alternating screens)
?? bytes compressed second palette
-------------
> 18 bytes total
Screen compression scheme:
1 word total number of control bytes that follow
1 control byte x
x < 0 : copy -x literal bytes (1 - 128)
x = 0 : next word specifies the number of times the following byte
has to be copied (0-65535)
x = 1 : next word specifies the number of bytes to be copied (0-65535)
x > 1 : repeat the next byte x times (2-127)
The 4 bitplanes are separated, first 8000 bytes of the first bitplane, then 8000 bytes
for the second, 8000 bytes for the third and 8000 bytes for the fourth; a total of 32000 bytes.
Palette compression scheme:
the palette compression scheme is the same as the screen compression but it works with
16 bit words
1 word total number of control bytes that follow
1 control byte x
x < 0 : copy -x literal words (1 - 128)
x = 0 : next word specifies the number of times the following word
has to be copied (0-65535)
x = 1 : next word specifies the number of words to be copied (0-65535)
x > 1 : repeat the next word x times (2-127)
In total 9616 palette entries are stored. 200 scanlines with 3 palettes
(48 colors) each, plus one final palette (16 colors). PhotoChrome files
with a few extra entries have been found. The first scanline usually
contains no data.
/*
* Given an x-coordinate and a color index, returns the corresponding
* Photochrome palette index.
*
* by Hans Wessels; placed in the public domain januari, 2008.
*/
int find_pcs_index(int x, int c)
{
int x1=4*c;
int index = c;
if(x>=x1)
{
index+=16;
}
if((x>=(x1+64+12)) && (c<14))
{
index+=16;
}
if((x>=(132+16)) && (c==14))
{
index+=16;
}
if((x>=(132+20)) && (c==15))
{
index+=16;
}
x1=10*c;
if((c&1)==1)
{
x1-=6;
}
if((x>=(176+x1)) && (c<14))
{
index+=16;
}
return index;
}
<QuantumPaint> *.PBX (low and medium resolution)
3 bytes 0
1 byte mode, 0x00 = 128 color low resolution pciture,
0x01 = 32 color medium resolution picture,
0x80 = 512 color picture low resolution picture
0x81 = 4096 color picture low resolution picture
1 word 0x8001 = compressed
Quantumpaint v2.00 sets it to 0x8000 for uncompressed files
Quantumpaint v1.00 seems to use 0x0000 for lowras and 0x0333
for medium res bytes. The PBX viewer only tests for 0x8001.
122 bytes ??
total 128 header bytes
?? bytes palette data;
for uncompressed normal pictures 8 pallete datasets follow:
16 words: 16 palettes
1 word: number of the first line this pallet is used
1 word: 0 the palette is not active, else this pallete is active
1 word: first color of color cycle
1 word: last color of color cycle
1 word: cycle speed, number of vbl's between steps, 0 = fastest
1 word: 0: no cycling, 1 cycle right, 0xffff cycle left
2 word: ?? should be zero
__
48 bytes per palette
The first palette should always be active and start on line 0
___
384 bytes palette data for low (128 color) and medium (32 color) pictures
for uncompressed 512 color pictures 6400 words (32 colors per scanline)
for uncompressed 4096 color pictures 12800 words (32 colors per scanline,
2 palette sets for alternating screens, two 6400 word blocks)
?? bytes screen data, for uncompressed pictures this is 32000 bytes for all modes
--------
> 128 bytes total
Compression scheme
Palette and screen data are compressed into one block using packbits compression.
The expanded screen data is not simply screen memory bitmap data; instead, the
data is divided into four sets of vertical columns. (This results in
better compression.) A column consists of one specific word taken
from each scan line, going from top to bottom. For example, column 1
consists of word 1 on scanline 1 followed by word 1 on scanline 2, etc.,
followed by word 1 on scanline 200.
The columns appear in the following order:
1st set contains columns 1, 5, 9, 13, ..., 69, 73, 77 in order
2nd set contains columns 2, 6, 10, 14, ..., 70, 74, 78 in order
3rd set contains columns 3, 7, 11, 15, ..., 71, 75, 79 in order
4th set contains columns 4, 8, 12, 16, ..., 72, 76, 80 in order
This colmn ordering is just the same as in the Tiny format.
for medium res it is the same only with two stes for the two medium res bitplanes.
/*
* Given an x-coordinate and a color index, returns the corresponding
* QuantumPaint palette index.
*
* by Hans Wessels; placed in the public domain januari, 2008.
*/
int find_pbx_index(int x, int c)
{
int x1 = 10 * c;
if (1 & c)
{ /* If c is odd */
x1 = x1 - 5;
}
else
{ /* If c is even */
x1 = x1 + 1;
}
if(c>7)
{
x1+=12;
}
if(x>=(x1+75))
{
c = c + 16;
}
return c;
}
<Art Director> *.ART (low resolution only)
16000 words picture data (screen memory)
16 words palette
7 * 16 words 7 more palettes for animation
8 * 1 byte display time for palettes, use first palette with non zero display time
248 bytes unknown
-------------
32512 bytes total
<C.O.L.R. Object Editor Mural> *.MUR (low resolution only)
16000 words picture data (screen memory)
(palettes are stored in separate files)
-----------
32000 bytes total
<Doodle> *.DOO (high resolution only)
16000 words picture data (screen memory)
-----------
32000 bytes total
<Cyber Paint Sequence> *.SEQ (low resolution only)
This format, while fairly complex, yields excellent compression of animated
images while offering reasonably fast decompression times.
1 word magic number [$FEDB or $FEDC]
1 word version number
1 long number of frames
1 word speed (high byte is vblanks per frame)
118 bytes reserved
---------
128 bytes total for .SEQ header
for each frame {
1 word type (ignored?)
1 word resolution [always 0]
16 words palette
12 bytes filename [usually " . "]
1 word color animation limits [not used]
1 word color animation speed and direction [not used]
1 word number of color steps [not used]
1 word x offset for this frame [0 - 319]
1 word y offset for this frame [0 - 199]
1 word width of this frame, in pixels (may be 0, see below)
1 word height of this frame, in pixels (may be 0, see below)
1 byte operation [0 = copy, 1 = exclusive or]
1 byte storage method [0 = uncompressed, 1 = compressed]
1 long length of data in bytes (if the data is compressed, this
will be the size of the compressed data BEFORE decompression)
60 bytes reserved
--------
128 bytes total for frame header
? bytes data
}
Frames are "delta-compressed," meaning that only the changes from one
frame to the next are stored. On the ST, .SEQ files are always full-screen
low resolution animations, so the sequence resulting from expanding all the
data will be n 320 by 200 pixel low resolution screens, where n is given in
the .SEQ header.
Since only the changes from frame to frame are stored, image data for a
frame will rarely be 320x200 (except for the very first frame, which will
always be a full screen). Instead what is stored is the smallest rectangular
region on the screen that contains all the changes from the previous frame to
the current frame. The x offset and y offset in the frame header determine
where the upper left corner of the "change box" lies, and the width and height
specify the box's size.
Additionally, each "change box" is stored in one of five ways. For each
of these, the screen is assumed to have the full-screen image from the last
frame on it.
o uncompressed copy: The data for this frame is uncompressed image data,
and is simply copied onto the screen at position (x, y) specified
in the frame header.
o uncompressed eor: The data for this frame is exclusive or'ed with the
screen at position (x, y).
o compressed copy: The data for this frame must be decompressed (see
below), and then copied onto the screen at position (x, y) specified
in the frame header.
o compressed eor: The data for this frame must be decompressed (see
below), and then exclusive or'ed with the screen RAM at position (x, y).
o null frame: The width and/or height of this frame is 0, so this
frame is the same as the previous frame.
Of the 5 methods above, the one that results in the smallest amount
of data being stored for a particular is used for that frame.
Compression Scheme:
Compression is similar to that employed by Tiny, but is not quite as
space-efficient.
Control word meanings:
For a given control word, x:
x < 0 Absolute value specifies the number of unique words to
take from the data section (from 1 to 32767).
x > 0 Specifies the number of times to repeat the next word
taken from the data section (from 1 to 32767).
Note that a control word of 0 is possible but meaningless.
Format of expanded data:
The expanded data is not simply screen memory bitmap data; instead the four
bitplanes are separated, and the data within each bitplane is presented
vertically instead of horizontally. (This results in better compression.)
To clarify, data for a full screen would appear in the following order:
bitplane 0, word 0, scanline 0
bitplane 0, word 0, scanline 1
...
bitplane 0, word 0, scanline 199
bitplane 0, word 1, scanline 0
bitplane 0, word 1, scanline 1
...
bitplane 0, word 1, scanline 199
...
bitplane 0, word 79, scanline 199
bitplane 1, word 0, scanline 0
...
bitplane 3, word 79, scanline 199
Note however, that the data does not usually refer to an entire screen, but
rather to the smaller "change box," whose size is given in the frame header.
<Animatic Film> *.FLM (low resolution only)
1 word number of frames
16 words palette
1 word speed (0 - 99; value is 99 - # vblanks to delay between frames)
1 word direction (0 = forwards, 1 = backwards)
1 word end action (what to do after the last frame)
0 = pause, then repeat from beginning
1 = immediately repeat from beginning
2 = reverse (change direction)
1 word width of film in pixels
1 word height of film in pixels
1 word Animatic version number (major) [< 2]
1 word Animatic version number (minor)
1 long magic number 27182818 (hex)
3 longs reserved for expansion (should be all zeros)
--------
32 words total for header
? words image data (words of screen memory) for each frame, in order
<Animaster Sprite Bank> *.ASB (low resolution only)
1 word number of frames - 1
1 word ?
1 byte maximum width, in pixels
1 byte maximum height, in pixels
16 words palette
--------
38 bytes total for header
For each frame {
1 word width of this frame (in pixels) - 1
1 word height of this frame (in pixels) - 1
1 word ?
? words image data (words of screen memory)
}
<STOS> *.MBK
9 words ?
1 long $19861987 (magic number?)
1 long offset from this long to header for low resolution
parameter block (if past end of file, no low res frames)
1 long offset from this long to header for med resolution
parameter block (if past end of file, no med res frames)
1 long offset from this long to header for high resolution
parameter block (if past end of file, no high res frames)
1 word number of low resolution frames
1 word number of medium resolution frames
1 word number of high resolution frames
For each frame {
1 long offset to data (probably only used internally by STOS)
1 byte width in words (multiply by 16 to get width in pixels)
1 byte height in pixels
1 byte X hotspot location
1 byte Y hotspot location
}
(The format implies other stuff could be here.)
1 long ["PALT" $50414C54]
16 words palette
? words of data for each frame, in the order mentioned in the
header. Monoplanar mask data follows image data for each
frame.
----------
? words total
The frames often seem to be in semi-random order, not necessarily in
the order they are to be animated.
<GEM Bit Image> *.IMG
1 word version number of image file [1]
1 word length of header in words [usually 8]
1 word number of color planes [1 for monochrome]
1 word pattern length in bytes [1-8, usually 2 for screen images]
1 word pixel width in microns (1/1000 mm, 25400 microns per inch)
1 word pixel height in microns
1 word line width in pixels
1 word number of lines
-------
? words header length defined in 2nd word of header
? bytes data
NOTES: If the image is a color image (planes > 1), the planes are stored
separately starting with plane 0. There is, however, no standard way of
storing the color palette. Some programs may save the palette in separate
files, some may extend the header. For this reason, you should never
assume the header is 8 words long, always get the header length from the
2nd word of the header. Also, the line width in the 7th word is the number
of pixels in a line. Since the data is encoded in byte-wide packets, the
actual unpacked line width is always a multiple of 8, and may be 1-7 pixels
longer than the length specified in the header.
For each byte x in the data section,
x = 0 Pattern/scanline run.
Read the next byte, n (unsigned).
If n > 0 then:
Read a number of bytes equal to the "pattern
length" word in the header. Repeat this
pattern n times.
If n = 0 then:
Scanline run. Data for the next scanline
is to be used multiple times. Read the
following record:
1 byte flag byte [$FF]
1 byte number of times to use
next scanline data
The data for the next scanline follows,
compressed normally.
x = 80 (hex) Uncompressed bit string. The next byte
determines the number of bytes to use
literally. The literal data bytes follow.
otherwise Solid run. The value of x determines
what to draw. The high bit specifies whether
the pixels are set or cleared. A 1 indicates
a byte-run using $FF, a 0 indicates a byte-run
using $00. The low 7 bits, taken as an unsigned
quantity, specify the length of the run in bytes.
<STAD> *.PAC (high resolution only)
4 bytes "pM86" (vertically packed) or "pM85" (horizontally packed)
1 byte id byte
1 byte pack byte (most frequently occurring byte in bitmap)
1 byte "special" byte
-------
7 bytes total for header
? bytes data
The data is encoded as follows. For each byte x in the data section:
x = id byte Read one more byte, n. Use pack byte
n + 1 times.
x = "special" byte Read two more bytes, d, and n (in order).
Use byte d n + 1 times.
otherwise Use byte x literally.
<Imagic Film/Picture> *.IC1 (low resolution)
*.IC2 (medium resolution)
*.IC3 (high resolution)
4 bytes "IMDC"
1 word resolution (0 = low res, 1 = medium res, 2 = high res)
16 words palette
1 word date (GEMDOS format)
1 word time (GEMDOS format)
8 bytes name of base picture file (for delta compression), or zeroes
1 word length of data (?)
1 long registration number
8 bytes reserved
1 byte compressed? (0 = no, 1 = yes)
If compressed {
1 byte delta-compressed? (-1 = no, > -1 = yes)
1 byte ?
1 byte escape byte
}
-------
65 bytes total for header (68 bytes if compressed)
? bytes data
Compressed data may be either stand-alone or delta-compressed (relative
to the base picture named in the header). Delta compression involves
storing only how the picture differs from the base picture (i.e., only
portions of the screen that have changed are stored). This is used to
to encode animated sequences efficiently.
Compressed data, stand-alone:
For each byte x in the data section:
x = escape byte Read one more byte, n. (n is unsigned).
If n >= 2, use the next byte n times.
If n = 1, keep reading bytes until a
byte k not equal to 1 is encountered.
Then read the next byte d.
If the number of 1 bytes encountered is o,
use d (256 * o + k) times. I.e.,
if (n == 1) {
o = 0;
while (n == 1) {
o++;
n = next byte;
}
k = n;
d = next byte;
Use d (256 * o + k) times.
}
else {
d = next byte;
Use d (n) times.
}
x != escape byte Use x literally.
Compressed data, delta compressed:
For each byte x in the data section:
x = escape byte Read one more byte, n. (n is unsigned).
If n >= 3, use the next byte n times.
If n = 1, do the same as for n = 1 in
stand-alone compression (above).
If n = 2, then set n = next byte.
If n = 0, end of picture.
If n >= 2, take n bytes from base
picture.
If n = 1, do the same as for n = 1
in stand-alone compression (above),
but take (256 * o + k) bytes from
base picture.
x != escape byte Use x literally.
<IFF Format> *.IFF
4 bytes "FORM" (FORM chunk ID)
1 long length of file that follows
4 bytes "ILBM" (InterLeaved BitMap file ID)
4 bytes "BMHD" (BitMap HeaDer chunk ID)
1 long length of chunk [20]
20 bytes 1 word = image width in pixels
1 word = image height in lines
1 word = image x-offset [usually 0]
1 word = image y-offset [usually 0]
1 byte = # bitplanes
1 byte = mask (0=no, 1=impl., 2=transparent, 3=lasso)
1 byte = compressed [1] or uncompressed [0]
1 byte = unused [0]
1 word = transparent color (for mask=2)
1 byte = x-aspect [5=640x200, 10=320x200/640x400, 20=320x400]
1 byte = y-aspect [11]
1 word = page width (usually the same as image width)
1 word = page height (usually the same as image height)
4 bytes "CMAP" (ColorMAP chunk ID)
1 long length of chunk [3*n where n is the # colors]
3n bytes 3 bytes per RGB color. Each color value is a byte
and the actual color value is left-justified in the
byte such that the most significant bit of the value
is the MSB of the byte. (ie. a color value of 15 ($0F)
is stored as $F0) The bytes are stored in R,G,B order.
4 bytes "CRNG" (Color RaNGe chunk ID)
1 long length of chunk [8]
8 bytes 1 word = reserved [0]
1 word = animation speed (16384 = 60 steps per second)
1 word = active [1] or inactive [0]
1 byte = left/lower color animation limit
1 byte = right/upper color animation limit
4 bytes "CAMG" (Commodore AMiGa viewport mode chunk ID)
1 long length of chunk [4]
1 long viewport mode bits:
bit 2 = interlaced
bit 7 = half-bright
bit 11 = HAM
bit 15 = high res
4 bytes "BODY" (BODY chunk ID)
1 long length of chunk [# bytes of image data that follow]
? bytes actual image data
NOTES: Some of these chunks may not be present in every IFF file, and may
not be in this order. You should always look for the ID bytes to find a
certain chunk. All chunk IDs are followed by a long value that tells the
size of the chunk (note that "ILBM" is not a chunk ID). This is the number of
bytes that FOLLOW the 4 ID bytes and size longword. The exception to this is
the FORM chunk. The size longword that follows the FORM ID is the size of the
remainder of the file. The FORM chunk must always be the first chunk in an
IFF file.
The R,G,B ranges of AMIGA and ST are different (AMIGA 0...15, ST 0...7),
as is the maximum number of bitplanes (AMIGA: 5, ST: 4).
Format of body data
An expanded picture is simply a bitmap. The packing method is PackBits
(see below), and is identical to MacPaint and DEGAS Elite compressed.
The (decompressed) body data appears in the following order:
line 1 plane 0 ... line 1 plane 1 ... ... line 1 plane m
[line 1 mask (if appropriate)]
line 2 plane 0 ... line 2 plane 1 ... ... line 2 plane m
[line 2 mask (if appropriate)]
...
line x plane 0 ... line x plane 1 ... ... line x plane m
[line x mask (if appropriate)]
The FORM chunk identifies the type of data:
"ILBM" = interleaved bit map
"8SVX" = 8-bit sample voice
"SMUS" = simple music score
"FTXT" = formatted text (Amiga)
The ST version of DPAINT has a different format in the body data. Within
the BODY chunk there is a VDAT chunk. In every VDAT chunk data is compressed
in columns, like in the Tiny format. Only the compression routine is slightly
different.
4 bytes 'VDAT' vertical bitplane data
4 bytes length of cunk
?? bytes compressed data
Data compression format:
2 bytes cmd_cnt number of cmd bytes
while(cmd_cnt>0)
1 byte cmd 0: read two bytes, count
output 2*count literal bytes
1: read two bytes, count and read 2 bytes, data (1 word)
output data count times
<0: output 2*(128-(cmd&0x7f)) literal bytes
>2: read 2 bytse, data (1 word)
output data (cmd&0x7f) times
<HighresMedium> *.HRM
This format is found in only one demo: "HighResMode" by Paradox. The
pictures are interlaced in medium resolution with 35 colors per line.
The files are packed with Ice. The unpacked format is as follows:
64000 bytes screen data, 160 bytes per scanline, 400 lines
28000 bytes palette data, 70 bytes per line
-----
96000 bytes
/*
* Given an x-coordinate and a color index, returns the corresponding
* HighResMedium palette index.
*
* by Hans Wessels; placed in the public domain januari, 2008.
*/
int find_hrm_index(int x, int c)
{
x+=80;
if(c==0)
{
return -1+4*(int)((x+0)/80);
}
else if(c==1)
{
return 4*(int)((x-8)/80);
}
else if(c==2)
{
return 1+4*(int)((x-40)/80);
}
return 2+4*(int)((x-48)/80);
}
<Overscan Interlaced> *.PCI
This format is found in only one demo: "Tobias Richter Fullscreen
Slideshow". The pictures are in an interlaced overscan format and
use a separate pallette per scanline (16 colors). The resolution of
the screendata is 352 x 278 pixels, with 176 words per line.
The files are packed with the Ice. The unpacked format is as follows:
48928 bytes screen data first screen
48928 bytes screen data second screen
8896 bytes color data first screen
8896 bytes color data second screen
------
115648 bytes total
The screen data is stored in 4 seperate bitplane blocks: first all data
of bitplane 0, then all data of bitplane 1, then the data of bitplane 2
and last the data of bitplane 3.
<Picture Packer> *.PP1 (low resolution)
*.PP2 (medium resolution)
*.PP3 (high resolution)
This is a STOS packed screen without the STOS MBK header in front of the
data. Although the STOS screen format has a flag for the resolution this
flag is set to medium resolution for all *.PP? files. The only correct
resolution info is in the extension. A realy brainded format.
<MacPaint> *.MAC
1 long version number [0=ignore header, 2=header valid]
38 * 8 bytes 8x8 brush/fill patterns. Each byte is a pattern row,
and the bytes map the pattern rows top to bottom. The
patterns are stored in the order they appear at the bottom
of the MacPaint screen top to bottom, left to right.
204 bytes unused
-------------
512 bytes total for header
< 51200 bytes compressed bitmap data
-------------
< 51712 bytes total
NOTE: The version number is actually a flag to MacPaint to indicate if
the brush/fill patterns are present in the file. If the version is 0,
the default patterns are used. Therefore you can simply save a MacPaint
file by writing a blank header (512 $00 bytes), followed by the packed
image data.
Bitmap compression:
The bitmap data is for a 576 pixel by 720 pixel monochrome image.
The packing method is PackBits (see below). There are 72 bytes per
scan line. Each bit represents one pixel; 0 = white, 1 = black.
<FuckPaint> *.PI4, *.PI9
Fuckpaint was an early Atari Falcon drawing program. The format is
still popular because its simplicity. The PI4 extension is used for
320x240 pictures, the PI9 for 320x200 pictures. Except for the extension
the two formats are exact the same.
1024 bytes Palette 256 colors, in Falcon format, R, G, 0, B
38400 words Picture data, 8 interleaved bitplanes
-----------
77824 bytes total
<RGB Intermediate Format> *.RGB (low resolution only)
This format was invented by Lars Michael to facilitate conversions between
standard ST picture formats and higher resolution formats like GIF and IFF.
It supports 12 bits of color resolution by keeping the red, green and blue
components in separate bit planes.
1 word resolution (ignored)
16 word palette (ignored)
16000 words red plane (screen memory)
1 word resolution (ignored)
16 word palette (ignored)
16000 words green plane (screen memory)
1 word resolution (ignored)
16 word palette (ignored)
16000 words blue plane (screen memory)
------------
96102 bytes total
The format was derived by concatenating three DEGAS .PI1 files together --
one for each color gun. The RGB value for a pixel is constructed by looking
at the appropriate pixel in the red plane, green plane, and blue plane. The
bitplanes are in standard ST low resolution screen RAM format, but where pixel
values in screen RAM refer to palette entries (0 through 15), pixel values
here correspond to absolute R, G, and B values. The red, green, and blue
components for each pixel range from 0 to 15 (4 bits), yielding a total of
12 bits of color information per pixel. Not coincidentally, this is exactly
the format of ST palette entries (although on ST's without the extended
palette only the lower 3 bits of each color component are used).
You can view a single bit plane on a standard ST by splitting the .RGB file
into its three DEGAS .PI1 components and setting the palette to successively
brighter shades of gray.
<ComputerEyes Raw Data Format> *.CE1 (low resolution)
*.CE2 (medium resolution)
1 long [$45594553 or "EYES"]
1 word resolution [0 = low res, 1 = medium res]
8 words ?
If resolution = 0 {
64000 bytes red plane, 320 x 200, 1 pixel per byte
64000 bytes green plane, 320 x 200, 1 pixel per byte
64000 bytes blue plane, 320 x 200, 1 pixel per byte
------------
192022 bytes total
}
else If resolution = 1 {
128000 words 640 x 200, 1 pixel per word
------------
256022 bytes total
}
This is almost two formats in one:
Low resolution:
The planes are arranged vertically, instead of horizontally.
The first byte is the red component of pixel (0,0), the second is
(0,1),
and the third (0,2). The 201st corresponds to (1,0), etc. The 64001st
byte is the green component of (0,0).
Only the low six bits of each byte are used.
Medium resolution:
The picture is arranged vertically, instead of horizontally.
The first word is pixel (0,0), the second is (0,1), and the third
(0,2). The 200th is (1,0) etc.
Each word is divided up into the RGB values for the corresponding
pixel, as follows:
Bit: (MSB) 15 14 13 12 11 10 09 08 07 06 05 04 03 02 01 00 (LSB)
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
0 B4 B3 B2 B1 B0 G4 G3 G2 G1 G0 R4 R3 R2 R1 R0
Bit 15 is not used.
<TruePaint> *.TPI
1 long $504e5400 'PNT ' Magic
1 word $0100 ???? file version
1 word palette_size size==0 for true color
1 word x_size
1 word y_size
1 word bits_per_pixel
1 word $0000 ????
1 long picture_data_size = ((x_size+15)&0xffff0)*y_size*bits_per_pixel/8
108 bytes $0
---------
128 bytes total for header
3*palette_size words Palette data, RGB, values 0..1000. The colors are in
VDI order
picture_data_size bytes Interleaved bitplanes for bits_per_pixel<16, a 16 bit
word per pixel for 16-bit pictures, RRRRrGGGGGgBBBBBb.
The line length is a multiple of 16 pixels for all bit depths
<DelmPaint> *.DEL, *.DPH
Delmpaint is a 256 color painting package. It works in 320x200 and 320x240 but
there is no difference in the file type. From a .DEL file you can not tel whether
it is a 320x200 or a 320x240 file. The same is true for a *.DPH file, which is
either a 640x400 or a 640x480 file. The bigger format is always assumed.
*.DEL format:
The *.DEL format contains 3 compressed blocks which are decompressed 32000 bytes.
Those three blocks joined together are the depacked file.
Paked:
1 long length of 1st packed block
1 long length of 2nd packed block
??? bytes 1st packed block, depacked 32000 bytes
??? bytes 2nd packed block, depacked 32000 bytes
??? bytes 3rd packed block, depacked 32000 bytes
The blocks are packed with the same algorithm as used in Crackart
Depacked:
256 longs Palette 256 colors, in Falcon format, R, G, 0, B
38400 words Picture data, 8 interleaved bitplanes
*.DPH format:
The *.DPH format contains 11 compressed blocks which are decompressed 32000 bytes.
Those three blocks joined together are the depacked file.
Paked:
10 long length of 11st to 10th packed block
??? bytes 1st packed block, depacked 32000 bytes
??? bytes 2nd packed block, depacked 32000 bytes
....
??? bytes 1th packed block, depacked 32000 bytes
The blocks are packed with the same algorithm as used in Crackart
Depacked:
256 longs Palette 256 colors, in Falcon format, R, G, 0, B
38400 words Picture 1 320x240 data, 8 interleaved bitplanes
38400 words Picture 2 320x240 data, 8 interleaved bitplanes
38400 words Picture 3 320x240 data, 8 interleaved bitplanes
38400 words Picture 4 320x240 data, 8 interleaved bitplanes
Finally you have to join the pictures into one huge 640x480 picture.
Take 320 bytes from picture 1, then 320 from 2, repeat 240 times, do
the same for picture 3 and 4.
<PackBits Compression Algorithm>
The following packing algorithm originated on the Mac, was adopted by
Electronic Arts/Commodore for use in the IFF standard, and then by Tom
Hudson for use in DEGAS Elite. The algorithm is currently used in
MacPaint, IFF, and DEGAS Elite compressed file formats. Each scan line
is packed separately, and packing never extends beyond a scan line.
For a given control byte 'n':
0 <= n <= 127 : use the next n + 1 bytes literally (no repetition).
-127 <= n <= -1 : use the next byte -n + 1 times.
n = -128 : no operation, not used.
-------------------------------------------------------------------------
* Roland Waldi contributed extensive information on the following formats:
GEM, IMG, Doodle, STAD, Imagic Film/Picture, Art Director, IFF
** John Brochu, ST picture formats guru, provided sage advice and many
corrections to the following formats:
NeoChrome, DEGAS Elite Compressed, Spectrum 512 Compressed,
GEM Bit Image, IFF, MacPaint
Back to Graphics