Expose

From Atari Wiki
Revision as of 21:36, 6 December 2023 by Exxos (talk | contribs) (Created page with "Exposé is a colour digitiser for the Atari Falcon by Titan Designs. The hardware consists of a circuit board and a colour control box (power cable reversed in photo). The hardware can be used with Apex Media v2.41 by Black Scorpion Software The board does require you to open up the Falcon 030 case and attach Exposé to the Falcon's expansion connector inside. Installers will have to decide how to get the digitisers cable to the outside of the case. A simple method i...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Exposé is a colour digitiser for the Atari Falcon by Titan Designs.

The hardware consists of a circuit board and a colour control box (power cable reversed in photo).

The hardware can be used with Apex Media v2.41 by Black Scorpion Software

The board does require you to open up the Falcon 030 case and attach Exposé to the Falcon's expansion connector inside.

Installers will have to decide how to get the digitisers cable to the outside of the case. A simple method is to cut an hole and then put a grommet around the cable tidying up the case.

The colour control box has it's power cable reversed (see photo)

Gallery

  • Board

    Board

  • Colour control box

    Colour control box

  • Exposé manual installation instructions

    Exposé manual installation instructions

  • Exposé manual cover

    Exposé manual cover

  • Apex Media software

    Apex Media software

Retrieved from ‘https://www.atari-wiki.com/index.php?title=Expose&oldid=1000000062’