Hints on installing EasyMint
NOTE:
- This FAQ is still being converted from the original TEXT version.
- To whom it may concern: I tried but failed to find a definitive Atari ST FAQ. So I appended together everything I could find that seemed relevant. I welcome any additions, comments or suggestions. Thank you
- Some layout differ from original text version due to wiki formatting limitation.
- The hardware and software vendors mentioned in this FAQ may no longer be selling Atari products. The vendor information are outdated.
Atari ST FAQ
Welcome to comp.sys.atari.st! Please read this FAQ before posting a question to comp.sys.atari.st, since a lot of common questions are answered here.
Thanks to David Paschall-Zimbel (davidli@simvax.labmed.umn.edu) for compiling most of this FAQ.
Entries are dated by the last change. ??.??.?? means they were last changed before the dates were added.
The following is an index of the questions answered in this part of the FAQ. For easy access to a particular question, search for the tag surrounded by colons (i. e. :GNU:). Questions marked with '*' are new or changed.
Welcome to comp.sys.atari.st (93.06.11)
This newsgroup is devoted to discussion about 16 and 32 bit Atari micros. At present that includes the Atari 520ST, 1040ST, Mega ST, STe, STacy, Mega STe, TT, and Falcon. There are also emulators for the Apple Macintosh and IBM PC/XT/AT available.
Most of the people who read this newsgroup are technically oriented. The newsgroup serves as a resource for Atari users ... feel free to contribute to the discussions.
Associated newsgroups include:
- comp.binaries.atari.st ! uuencoded binary programs
- comp.sys.atari.st.tech ! technical programming/hardware topics
- comp.sources.atari.st ! uuencoded/shar sources
All the models in the ST line (93.01.30)
This is a pretty complete list of all the ST/TT models and their main features. If you have any additions/correction, of course, send them to me.
| Name | CPU | RAM | TOS | B.I. | Extra | Comment |
| 130 ST | 8 | /1 | 1 | M | Never marketed | |
| 260 ST | 8 | /5 | 1 | M | ||
| 520 ST | 8 | /5 | 1 | M | ||
| 520 ST+ | 8 | 1 | 1 | M | ||
| 520 STm | 8 | /5 | 1.2 | M | ||
| 520 STfm | 8 | /5 | 1.2 | FM | ||
| 1040 ST | 8 | 1 | 1 | FM | ||
| 1040 STf | 8 | 1 | 1.2 | F | ||
| 1040 STm | 8 | 1 | 1.2 | M | ||
| 1040 STfm | 8 | 1 | 1.2 | FM | ||
| Mega 1 | 8 | 1 | 1.2 | F | MB | |
| Mega 2 | 8 | 2 | 1.2 | F | MB | |
| Mega 4 | 8 | 4 | 1.2 | F | MB | |
| STacy | 8 | 1 | ??? | F | Laptop | |
| STBook | 8 | 1 | ??? | F | Notebook | |
| 520 STe | 8 | /5S | 1.62 | FM | AV | |
| 1024 STe | 8 | 1S | 1.62 | FM | AV | |
| Mega STe | 16 | 1S | 2.06 | F | AV,MB,6U | |
| TT | 16/030 | Just for developer | ||||
| TT | 32/030 | S | 3.06 | F | AV,MB,6U | Various mem/HD configs |
| Falcon | 16/030 | 1,4,14 | 4.04 | F | AV,FC | Many enhancements! |
key:
| CPU': | 8 | 8 MHz 68000 | RAM: | /1 | 128KB | Built-in: | F | Floppy | ||
| 16 | 16 MHz 68000 | /5 | 512KB | M | TV Modulator | |||||
| 16/030 | 16 MHz 68030 | 1 | 1MB | |||||||
| 32/030 | 32 MHz 68030 | 2 | 2MB | |||||||
| 4 | 4MB | |||||||||
| S | SIMM slot |
| Extra: | AV | 8 bit digital stereo audio, 4096 colors, hardware scrolling, analog joystick ports |
| MB | MegaBus processor-direct bus slots | |
| 6U | 6U VME bus slots, second serial port | |
| FC | Motorola 56000 DSP, 16 bit stereo audio, much enhanced video |
TOS: Highest built-in TOS
What are the specs on the Falcon?
Here's some stuff I culled from the (reposted) Delphi conference with Sam Tramiel.
Here's the specs on the Atari Falcon 030:
CPU:
Motorola 68030 running at 16 Mhz
32-bit Bus
Optional 68881 or 68882 FPU
RAM: 1,4, or 14 megs
Standard Atari Cartridge Port
Motorola 56001 DSP chip
Expansion Bus:
Internal direct processor slot for 386SX PC emulation, or other coprocessor
Graphics:
Super VGA graphics: 640x480 with 256 colors
True color 16 bit mode allowing a display of up to 65,536 colors
Accepts external video sync signal to allow high quality genlocking
Overlay mode for easy video titling and special effects
Overscan on TV's and ST Color monitors
262,144 possible colors
hardware-assisted horizontal fine scrolling
BLiTTER graphics co-processor
Sound features:
Eight 16 bit audio DMA record and playback channels
Stereo 16 bit digital DMA input
Stereo 16 bit DMA audio output
SDMA sound/DMA Coprocessor
Standard Ports
SCSI II port with DMA
High speed LocalTalk compatible LAN
Connector for analog RGB color (ST or VGA) or composite video
RS232C serial port
Bidirectional parallel port
MIDI IN/MIDI OUT
Stereo microphone input, miniature stereo plug
Stereo audio out, miniature stereo plug
Two joystick connectors
Two enhanced digital/analog controller/light pen connectors
Data Storage
1.44 Mbyte floppy disk drive
Optional internal IDE Hard Disk
System software
Pre-emptive Multitasking with adaptive prioritzation (MultiTOS)
Inter process communication
NewDesk desktop and eXtensible control panel
Multiple window user interface; number of windows limited
only by memory or software in use.
Hardware Accelerators
(Thanks to Shoou-yu Tang sytang@lamar.colostate.edu for this info.)
- 68000 based:
- ICD adspeed ST/STe
- Fast Tech Turbo
- T-16 (16MHz)
- T-20 (20MHz)
- T-25 (25MHz)
- 68030 based:
- Gadget by Small SST (16MHz to 40MHz user changeable, 8 SIMM slot 68882 FPU socket, 1 expansion slot, TOS 2.0x).
- Fast Tech : Tiny Turbo Full size version
Can I use a SCSI tape drive? (093.08.11)
Archive-name: csas-faq/part3
Yes, just about any SCSI tape drive should be useable on the ST line. (Of course, if your computer doesn't already have a SCSI port, you'll need a SCSI host adapter.) There are at least two freeware/shareware programs that can help you back up your HD to SCSI tape: TapeBIOS and GEMAR (a German GEM ARchiver)
Can I use a Hard Drives?
What should I know about hard drives and the ST? (Thanks to Shoou-yu Tang sytang@lamar.colostate.edu for this info.)
To get a hard drive for ST, STe, Mega, Mega STe or TT(using DMA port):
- Host adapter (convert the ST's DMA to SCSI standard):
ICD, Supra, BMS are the three major manufature. ICD has very good software updating support and updates very often. - SCSI hard drive or MFM/RLL drive with SCSI adapter:
- SCSI drive:
Like Quantum Pro80LPS, Seagate ST-xxxN series, they have a 50 pins IDC connector, and usually say SCSI hard drive or Mac drive. (Any Mac except Mac128, Mac512, FatMac has SCSI built in, so a drive that works with Mac usually has SCSI interface).
No other adapter needed, just connect to the host adapter in 1. - MFM/RLL drive:
These types of drive is older and used in older IBM machines. To use them you need an adapter to convert them to SCSI. Adaptec 4000/4000A is for MFM, 4070 for RLL drive, Emulex and OMTI also has similar cards availible. Adaptec has stopped production for quite sometime so look for these in used/liquidation place. (usually goes $40 to $75 each).
- SCSI drive:
Connect the drive to the adapter (said Adaptec 4000) then connect the adapter to the host adapter. (said ICD). It looks like following:
-------------- ----------- ------------ ----------
| MFM drive |------->|ACB 4000 |------>| ICD |------>| ST DMA |
-------------- ----------- ------------ ----------
- Case, power supply and cabels for the drive system:
Unless you have Mega, Mega STe, TT and the drive is 3.5" so you will put the drive internally, you will need a case with power supply to house the adapter and hard drive. IBM case is very easy to get and has a lot of space for expansion.
For older drive you need about 40 watts each drive, for newer 3.5" drive they use about 20 watts or less, Quantum LPS drive use about 10 watts each, make sure your power supply has more than the drives need. Again if you use IBM case, the 150 watts power supply for that type case can drive at least 3 drives without problem.
Cables: DMA cable usually comes with the host adapter.
power cable from power supply to drive usually comes with power supply
SCSI cable from host adapter to SCSI drive or adapter(for MFM/RLL), it's 50pins IDC female connector on each end with 50 conductors cable. Should be availible at place you get the drive.
For MFM/RLL drive you will need the usual MFM/RLL drive cable: a 34 conductors cable and a 20pins connector, again should be available at the place you get the drive).
Now, connect them all together. Before power up, check the connection again. And check the jumper setting on the drive (consult the drive's manual). If you are using more than one drive with the system, make sure only the last drive has the terminator (either a DIP or a signle inline package of resistor, which usually is socketed and close to the SCSI connector on the drive circle board. Remove the terminator from other drives. [only the last drive should have the terminator]
Software usually comes with the host adapter, or you can FTP atari's AHDX5 from ftp sites.
Can I use 1.44 meg floppy disks and Flopticals? (93.08.11)
1.4 megabyte floppy drives will soon be available from Atari for MegaSTe and TT machines. If you own an older Atari ST, there is a company which offersa $199 kit (including floppy) to install and use the drive.
Note that Tos versions prior to 2.05 will not format a 1.4 meg floppy from the desktop.
Floptical drives (floppys that use optical tracking to get 21MB on a 3.5" disk)can also be used through a SCSI port. ICD's newer host adapter software (the'PRO' version) will handle them.
How can I enjoy enhanced graphics on my ST?
For stock STs, JRI makes a chip which allows a 4096 color palette. There is also a public domain enhancement that allows 32768 colors on older STs. This can be found as 32kcolor.lzh on some archives.
There are a number of graphics boards on the market. Here is a first pass
at listing some of them. The information is based on postings by Ben Gilbert
and Jari Lehto.
C32 board by Matrix Datensystem (Germany)
- 800x608, 256 colors
- all ST/TT models
- 256k, 512k and 1meg versions
C75Z board by Matrix Datensystem (Germany)
- 1024x768, 256 colors
- Mega ST or STe, TT VME Buss
(Matrix GmbH has over 15, maybe over 20 with all versions, different graphics boards available, from hobbyist to professional, from CAD to GenLock and digitizing.)
ISAC board by Dover Research Company (U.S.)
- 1024x768, 16 colors from palette of 4096
- makes hi-res look like ST low res, just with a huge window
- Mega ST buss
- Dover Research Co. (612) 492-3913
The Imagine by Wittich Computer GmbH (Germany)
- 1024x768, 256 colors
- Mega ST only
(Versions available for all ST/TT models. Several possible resolutions. Reasonable price, but slow and not very compatible..)
Crazy Dots by TKR (Germany)
- 1024x768, 256 colors
- Mega ST only
(1280x800, 256 colors out of 16.7 million color palette. 1664x1200 for both 16 color and monochrome. True color option available. Mega ST, Mega STe and TT.)
reSOLUTION SuperVGA by GengTec (Germany)
- 8 resolutions, 320x200 through 1600x1200
- 16 colors without driver, 256 out of 256,000 with driver
- 1 mb RAM
- uses a standard VGA monitor
- Mega ST or regular ST
- available in U.S. from Rio Datel, 1-800-782-9110, (702) 454-700
(1024x768 is the highest resolution with 256 colors. Driver is called Multicolor VGA option. Compatible with NVDI and Blitter. Multisync monitor recommended.)
AlberTT
- like ISAC card, but specific for TT VME buss
MegaScreen
- 832x624 monochrome
- connects to MegaBus
- works with Spectre
Reflex
- 1024x1024 with SM124 monitor
- 2048x2048 possible with expansion
- usable with most big-screen displays
ODIN by Marvin AG (Switzerland)
- external expansion
- gives TT-resolutions to a regular ST
Cyrel
- RISC-based card
- extremely costly
Here's a few more cards, available from OverScan GbR, Saentisstrasse 166,
1000 Berlin 48, West Germany, ++49 30 721 94 66, ++49 30 721 56 92 (FAX),
++49 30 727 05 6 (Mailbox, language: German)
- Autoswitch OverScan for the ST (NO STE compatibility) is DM 129.--,
you don't have to buy a new monitor. The maximum resolution on a SM 124 is variable, but in most cases at about 732*480. - AutoSwitch OverScan TT is a VME board. It's about 249.-- DM,
you also can use your old monitor, but it only works in the TTs five color modes (3 ST-compatible modes, 2 TT-modes). Resolutions are variable, ask OverScan about the values for your monitor. - Falcon ScreenBlaster blows up your Falcons resolution to a maximum of nearly 900*600 on SVGA-monitors. It'll be shipping as soon as Falcon030s become available, and the pricing will be near 150.-- DM.
Graphics cards for which information is sought:
- OmniChrome board by Omnimon Peripherals
- JRI GenLock
- Atari/Lexicor 24 bit color card
Jari Lehto proposed the following recommendations:
Low budget SVGA - reSOLUTION Professional high-end use Cyrel (or is it Cyrix?) Hobby or semi-pro DTP Reflex Hobby DTP MegaScreen To obtain TT resolution ODIN
A few keyboard questions (93.09.02)
Here's how to connect a MegaST-keyboard to a 1040ST:
It's taken from the "ST-Computer" October '90 ('Quick-Tips')
It's no problem to connect the MegaST keyboard to the smaller computers 520St and 1040ST. To do that, you only have to get a 6-pin western connector plug to be connected to the keyboard. (available in Electronic shops) After that four cables must be connected with the 'Pfostereihe' (the plug inside the 1040ST) where normally the dazzy original-keyboard is plugged in. The exact connection is shown on picture 2 and 3
____________
___| | * * * * * * * * * * * * * * * * o * * 1
| 6 * | 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 1 o
| 5 * | * 3
| 4 * | Picture 2 * 4
| 3 * | 520 ST Keyboard plug (not for You, Jeff) * 5
| 2 * | * 6
| 1 * | * 7
|___ | * 8
|___________|
Picture 1 Picture 3
Mega ST-Keyboard cable 1040ST
(seen from outside) Keyboard-Plug
Picture 3 (Meg to 1040ST) Picture 2 (Meg to 520ST)
MegST MegST
keyboard cable <--> 1040ST plug keyboard <--> 520ST plug
6 <--|----> 8 6 <--|----> 1
| |
5 <--| 5 <--|
4 <-------> 5 4 <-------> 14
3 <-------> 6 3 <-------> 15
2 <--|----> 4 2 <--|----> 13
| |
1 <--| 1 <--|
Eickmann Computer, Franktfurt
If you remove the keyboard from the Mega ST and switch on the computer, the computer won't boot up and send you a series of 'Alert-Beeps'. If YOU want to let your Mega ST run without a keyboard (FAX-Server a.s.o.) simply connect a restistor to the keyboard-plug in the Meg and at once there's silence and he'll do his job! (Freely translated from Eickmann-Computer by me)
6 * 10kj resistor 5 * _____ 4 *----|_____|-- 3 * | 2 *-------------+ 1 *-------------| Mega ST keyboard-plug (inside-view)
And here's another one: This one's about the Hardcopy-function of the ST's
Do you hate it - after pressing <Alternate>+<Help> the same time - when you don't have a printer connected to the parallel port of your ST and must wait a long time to work again because of the long break taking the computer to realize that there's no printer connected? Well, do this and forget about it:
connect the following pins of the printer port of your computer (better: create a Sub-D 25pin-male-plug an connect the pins on the soldering side):
pin 13 connected to 14 and 15 (all across the plug) pin 1 connected to 10 pin 23 connected to 11 and 12
What joysticks work best with the Atari ST?
The Atari ST works with joysticks with a 'standard' D-Socket. IBM-style joysticks, Apple joysticks, and Nintendo joysticks will -not- work.
Some recommended joysticks:
- Konix Navigator - "best .. if you want to use it for any length of time"
- Gravis - "responsive ... great for games like MidiMaze"
- WICO - "strong reed switches, hard plastic and metal components"
- Atari - "FAR more controllable and responsive than other, more durableunits"