CW PROG2MAC.S
;---------------------------------------------------------------------
; THE ST ASSEMBLY LANGUAGE WORKSHOP, VOLUME 2
; PROGRAM 2
;
; COPYRIGHT 1992 BY CLAYTON WALNUM
;---------------------------------------------------------------------
PTERM0 equ 0
CCONIN equ 1
CCONWS equ 9
APPL_INIT equ 10
APPL_EXIT equ 19
DGETDRV equ 25
DGETPATH equ 71
MSHRINK equ 74
FSEL_INPUT equ 90
AES_OPCODE equ 200
;--------------------------------------------------------------------
; MACROS
;--------------------------------------------------------------------
;--------------------------------------------------------------------
; This macro gets a single character from the keyboard, using the
; Cconin GEMDOS function.
;--------------------------------------------------------------------
.macro get_char
move #CCONIN,-(sp)
trap #1
addq.l #2,sp
.endm
;--------------------------------------------------------------------
; MAIN PROGRAM
;--------------------------------------------------------------------
text
; Calculate the size of the program area.
move.l a7,a5 ; Save addr of TPA.
lea stack,sp ; Load addr of our stack.
move.l 4(a5),a5 ; Get addr of TPA.
move.l 12(a5),d0 ; Get len of text segment.
add.l 20(a5),d0 ; Add len of data segment.
add.l 28(a5),d0 ; Add len of BSS segment.
add.l #$100,d0 ; Add len of TPA.
; Release unused memory back to the system.
move.l d0,-(sp) ; Push size of program on stack.
move.l a5,-(sp) ; Push program addr on stack.
clr -(sp) ; Clear dummy word on stack.
move #MSHRINK,-(sp) ; Push Mshrink opcode.
trap #1 ; Call GEMDOS.
add.l #12,sp ; Reset stack pointer.
; Clear some fields of the global array.
clr.l ap_ptree
clr.l ap_1resv
clr.l ap_2resv
clr.l ap_3resv
clr.l ap_4resv
; Call appl_init to initialize application.
move #APPL_INIT,control0 ; Place opcode in control array.
clr control1 ; Load length of init_in.
move #1,control2 ; Load length of int_out.
clr control3 ; Load length of addr_in.
clr control4 ; Load length of addr_out.
jsr aes ; Call the AES.
cmpi #$FFFF,ap_id ; Error?
beq end ; Yep. Outta here.
; Get current drive letter.
move #DGETDRV,-(sp) ; Call Dgetdrv function.
trap #1
addq.l #2,sp
add #'A',d0 ; Convert drive to ASCII.
move.b d0,pathname ; Move drive letter to pathname.
move.b #':',pathname+1 ; Add colon to pathname.
; Get current path.
move #0,-(sp) ; Call Dgetpath function.
move.l #pathname+2,-(sp)
move #DGETPATH,-(sp)
trap #1
addq.l #8,sp
; Add *.* to end of pathname.
move #127,d5 ; Init loop counter.
lea pathname,a5 ; Get address of pathname.
loop1:
tst.b (a5)+ ; Is character a null?
beq add_filespec ; Yep. Found end of pathname.
dbra d5,loop1 ; Nope. Try next character.
add_filespec:
subq.l #1,a5 ; Set addr to proper byte.
move.b #'\\',(a5)+ ; Add \*.* to path.
move.b #'*',(a5)+
move.b #'.',(a5)+
move.b #'*',(a5)
; Bring up the file selector.
move #FSEL_INPUT,control0 ; Load fsel_input opcode.
move #0,control1 ; Load length of int_in.
move #2,control2 ; Load length of int_out.
move #2,control3 ; Load length of addr_in.
move #0,control4 ; Load length of addr_out.
move.l #pathname,addr_in ; Load addr of path string.
move.l #filename,addr_in+4 ; Load addr of filename string.
jsr aes ; Call the AES.
cmpi #1,int_out+2 ; Chose OK button?
bne exit ; No, exit program.
tst.b filename ; Do we have a filename?
beq exit ; No, exit program.
; Construct final pathname.
move #127,d5 ; Init loop counter.
lea pathname,a5 ; Get addr of pathname.
loop2:
tst.b (a5)+ ; Is character a null?
beq found_null ; Yep.
dbra d5,loop2 ; Nope. Try next character.
found_null:
move #14,d5 ; Init loop counter.
loop3:
cmpi.b #'\\',-(a5) ; Found backslash?
beq add_filename ; Yes. Go tack on filename.
dbra d5,loop3 ; No. Try next character.
add_filename:
addq.l #1,a5 ; Set addr to char after \.
move #14,d5 ; Init loop counter.
lea filename,a6 ; Get addr of filename.
loop4:
move.b (a6),(a5)+ ; Add character to path.
tst.b (a6)+ ; Test for null.
beq got_filename ; If null, all done.
dbra d5,loop4 ; Copy next character.
; Show final pathname.
got_filename:
move.l #pathname,-(sp) ; call Cconws to show...
move #CCONWS,-(sp) ; the final pathname.
trap #1
addq.l #6,sp
get_char ; Wait for keypress.
; Close down application.
exit:
move #APPL_EXIT,control0 ; Load appl_exit opcode.
move #0,control1 ; Load length of int_in.
move #1,control2 ; Load length of int_out.
move #0,control3 ; Load length of addr_in.
move #0,control4 ; Load length of addr_out.
jsr aes ; Call the AES.
end:
move.w #PTERM0,-(sp) ; Back to desktop.
trap #1
;--------------------------------------------------------------------
; This subroutine calls the AES. Before calling this subroutine, the
; program must have correctly initialized the AES control, int_in,
; and addr_in arrays.
;
; Input: Appropriate values in the int_in, addr_in, and
; control arrays.
; Output: Appropriate values in the int_out, addr_out, and
; global arrays.
; Regs changed: NONE
; Uses: apb, global, int_in, int_out, addr_in, addr_out
;--------------------------------------------------------------------
aes:
movem.l a0-a7/d0-d7,-(sp) ; Save registers.
move.l #apb,d1 ; Load addr of apb.
move.l #AES_OPCODE,d0 ; Load AES opcode.
trap #2 ; Call AES.
movem.l (sp)+,a0-a7/d0-d7 ; Restore registers.
rts
data
apb: dc.l control,global,int_in,int_out,addr_in,addr_out
bss
even
global:
ap_version: ds.w 1
ap_count: ds.w 1
ap_id: ds.w 1
ap_private: ds.l 1
ap_ptree: ds.l 1
ap_1resv: ds.l 1
ap_2resv: ds.l 1
ap_3resv: ds.l 1
ap_4resv: ds.l 1
control:
control0: ds.w 1
control1: ds.w 1
control2: ds.w 1
control3: ds.w 1
control4: ds.w 1
int_in: ds.w 1
int_out: ds.w 2
addr_in: ds.l 2
addr_out: ds.l 1
pathname: ds.b 128
filename: ds.b 13
ds.l 255
stack: ds.l 1
Back to CW_CHAPTER_2