NEOchrome file format

From Atari Wiki
Revision as of 22:38, 2 January 2017 by Lp (talk | contribs) (New page)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
NEOchrome       *.NEO
 
1 word          flag byte [always 0]
1 word          resolution [0 = low res, 1 = medium res, 2 = high res]
16 words        palette
12 bytes        filename [usually "        .   "]
1 word          color animation limits.  High bit (bit 15) set if color
                animation data is valid.  Low byte contains color animation
                limits (4 most significant bits are left/lower limit,
                4 least significant bits are right/upper limit).
1 word          color animation speed and direction.  High bit (bit 15) set
                if animation is on.  Low order byte is # vblanks per step.
                If negative, scroll is left (decreasing).  Number of vblanks
                between cycles is |x| - 1
1 word          # of color steps (as defined in previous word) to display
                picture before going to the next.  (For use in slide shows)
1 word          image X offset [unused, always 0]
1 word          image Y offset [unused, always 0]
1 word          image width [unused, always 320]
1 word          image height [unused, always 200]
33 words        reserved for future expansion
16000 words     picture data (screen memory)
-----------
32128 bytes     total

Back to ST Picture Formats